SEARCH MINERALS EXPANDS CRITICAL RARE EARTH ELEMENT MINERALIZED ZONE AT FOX MEADOW, SE LABRADOR

VANCOUVER, British Columbia, April 06, 2020 (GLOBE NEWSWIRE) — Search Minerals Inc. (TSXV: SMY) (“Search” or the “Company”) is pleased to report assay results from FOX MEADOW, its third major mineralized zone in it’s Critical Rare Earth Element (“CREE”) District in SE Labrador. Trenching/channelling (6 new channels), mapping/prospecting and a UAV Magnetometer Survey indicate that the surface expression of this mineralized zone is up to 124m wide and 650m long. This surface expression is significantly larger than those over the related FOXTROT and DEEP FOX Resources. The mineralization is similarly hosted by peralkaline volcanic rocks and contains similar grades of the REE magnet materials (Nd, Pr, Tb and Dy); Zr and Hf also occur in significant concentrations. 
HIGHLIGHTS OF FOX MEADOW 2019 CHANNEL PROGRAMFOX MEADOW (all true widths) exhibits higher grade mineralization (> 190 ppm Dy) measuring at least 21.2m to 46.0m over 200m strike length; and, measuring at least 7.1m to 46.0m over 450m strike length;Channel assay highlights (all true widths):Section FMC-19-01: 244 ppm Dy, 1098 ppm Nd, 270 ppm Pr, 838 ppm La over 15.79m;Section FMC-19-02: 234 ppm Dy, 1184 ppm Nd, 296 ppm Pr, 943 ppm La over 7.8m;Section FMC-19-03: 221 ppm Dy, 990 ppm Nd, 241 ppm Pr, 763 ppm La over 10.84m;Section FMC-19-04: 269 ppm Dy, 1486 ppm Nd, 370 ppm Pr, 1126 ppm La over 4.61m;Section FMC-19-05/06: 220 ppm Dy, 1456 ppm Nd, 373 ppm Pr, 1399 ppm La over 3.23m.Section FMC-19-01contains 85.1m higher grade mineralization over 123.6m total thickness;FOX MEADOW CREE mineralization is similar to DEEP FOX and FOXTROT; third potential CREE deposit in the Port Hope Simpson-St. Lewis CREE District of SE Labrador.Greg Andrews, President/CEO states; “These results are very encouraging and support the vision of multiple deposits of High Grade CREE’s in our CREE district.  FOX MEADOW will be advanced through further exploration work to better define the surface expression to make the project drill-ready.  We congratulate Dr. Randy Miller and his team with identifying this prospect.  It is the surface expression channels widths, up to 124m, which is compelling to explore.  A potential drill program would help to understand whether the geological model is similar to FOXTROT and DEEPFOX.  Also, the assays contain significant quantities of zirconium (0.79 to 1.54% Zr) that mostly occurs in the mineral zircon in these rocks. We will investigate the possibility of extracting the zirconium as a value-added product from our existing processing flow sheet, which could also benefit the FOXTROT and DEEPFOX projects”.In contrast, both the DEEP FOX and FOXTROT mineralized resources are about 350-450m long and up to 40m thick. The surface expression of the FOX MEADOW mineralized zone is greater than that of DEEP FOX and FOXTROT combined.The FOX MEADOW prospect occurs about 11 km west of Port Hope Simpson and 1 km from a gravel-covered, three-season forest access road. Port Hope Simpson is about 40 km northwest of FOXTROT and 50 km from DEEP FOX on paved and all-season gravelled roads.
Quality Assurance / Quality Control (QA/QC):Channel samples, 10cm deep and 8cm wide, are cut by gas-powered diamond saw from cleaned outcrops to provide samples for assay and logging/reference. Each channel is cut into two vertical sections, similar to drill core, with a 6 cm thick section (weathering removed) being sent out for assay to Activation Laboratories Ltd. A 2 cm thick section is stored in channel boxes for reference and to provide due diligence/verification samples. The channels are cut perpendicular to strike, pieced together, logged and photographed to produce geological and geochemical sections. These channel samples, or horizontal drill holes, produce the same data as vertical diamond drill holes, except the data is from horizontal geological sections and the collected sample is 6 to 8 times bigger than NQ drill core. Additional 8 cm wide cuts from a channel interval make excellent preliminary metallurgical samples (1m of channel yields about 30kg of sample).Lithogeochemistry samples, all from bedrock, are collected by Company personnel, bagged and described. Reference samples are also collected for each grab, lithogeochemistry and channel sample. The samples are shipped to Activation Laboratories Ltd. (ActLabs) sample prep facility in Ancaster, Ontario, where they are crushed to 80% -10 mesh and riffled to produce a representative sample. This sample is then pulverized to 95% -200 mesh with the pulverizing mills being cleaned between each sample with cleaning sand. A representative sample is treated by a lithium metaborate/tetraborate fusion and then analyzed by ICP and ICP/MS techniques. Mass balance is required as an additional quality control technique and elemental totals of the oxides should be between 98% and 101%. For QA/QC purposes Search requires pulp and coarse reject duplicates every 20 samples and two Search reproducibility standards every 40 samples. ActLabs analyzes duplicates and splits approximately every 15 samples and also analyses 29 measured standards for QA/QC. To further enhance our QA/QC procedures Search has a program of checking analytical results with other labs to confirm the ActLabs results. ActLabs is a ISO/IEC 17025 accredited laboratory.Qualified Person:Dr. Randy Miller, Ph.D., P.Geo, is the Company’s Vice President, Exploration, and Qualified Person (as defined by National Instrument 43-101) who has supervised the preparation of and approved the technical information reported herein. The company will endeavour to meet high standards of integrity, transparency, and consistency in reporting technical content, including geological and assay (e.g., REE) data.About Search Minerals Inc.Led by a proven management team and board of directors, Search is focused on finding and developing resources within the emerging Critical Rare Earth Element (“CREE”) District of South East Labrador. The Company controls a belt 63 km long and 2 km wide including its 100% interest in the FOXTROT and DEEP FOX Projects, which are road accessible and at tidewater. Exploration efforts have advanced FOX MEADOW as a new CREE prospect very similar to and in close proximity to FOXTROT and DEEP FOX. The FOXTROT Project has a capital cost to bring the initial project into production ($152 M), a short payback period and is scalable due to Search’s proprietary processing technology. For further information, please contact:Greg Andrews
President and CEO
Tel: 604-998-3432
E-mail: info@searchminerals.ca
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.Not for distribution to U.S. Newswire Services or for dissemination in the United States.  Any failure to comply with this restriction may constitute a violation of U.S. securities laws.Cautionary Statement Regarding “Forward-Looking” Statements:This news release includes certain “forward-looking information” and “forward-looking statements” (collectively “forward-looking statements”) within the meaning of applicable Canadian and United States securities legislation including the United States Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, included herein, without limitation, statements relating the future operating or financial performance of the Company, are forward-looking statements.Forward-looking statements are frequently, but not always, identified by words such as “expects”, “anticipates”, “believes”, “intends”, “estimates”, “potential”, “possible”, and similar expressions, or statements that events, conditions, or results “will”, “may”, “could”, or “should” occur or be achieved. Forward-looking statements in this news release relate to, among other things, technical results from the Company’s drilling program and closing of the Offering. Actual future results may differ materially. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Forward-looking statements reflect the beliefs, opinions and projections on the date the statements are made and are based upon a number of assumptions and estimates that, while considered reasonable by the respective parties, are inherently subject to significant business, economic, competitive, political and social uncertainties and contingencies. Many factors, both known and unknown, could cause actual results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements and the parties have made assumptions and estimates based on or related to many of these factors. Such factors include, without limitation, the risk that the Company is not able to find suitable investors for the Offering or does not receive the approval of TSX Venture Exchange. Readers should not place undue reliance on the forward-looking statements and information contained in this news release concerning these times. Except as required by law, the Company does not assume any obligation to update the forward-looking statements of beliefs, opinions, projections, or other factors, should they change.